Well my Christmas has been somewhat darkened by the apparent problems some of the pro's have experienced regarding the relative and extreme softness of BMW's Jet Black E92 paint. On 2-3 different E92's in different parts of N. America (US and Canada) it has been well documented that there are difficulties in long term maintainability of a swirl
The line that goes to the front wastegate is easier if you remove the vacuum tanks and bracket. Basically, buy 10 ft of replacement line (OEM or silicone or whatever) and then remove each line individually on your car, cut the new line to match and then install. Rinse and repeat until all lines are replaced.
The latest video release from The Supercar Suspects kicks off with Chris unveiling this 2013 BMW E92 M3 that the owner upgraded with an ESS supercharger. This particular Bavarian beast is now putting out 610 hp. That’s a lot of power running through this rear-wheel drive monster, but the draw of this car isn’t only performance-based.
BMW factory paint is very thin! Okay so i had a one inch scratch on my passenger side skirt. It was about 2mm wide, pretty wide for a scratch and it was down to the plastic. I decided to use some touchup paint, clear coat then wet sand (2000grit) it smooth. I put 2 layers of paint, 1 layer of clear, and let it cure for a couple days. LcnVKh.